中文版 English Pусский Français
Your current location:Home > Repair > Technical Know-how

Technical Know-how

No.

Breakdown

Symptoms

Causes

Solutions

1

No discharging

During normal production or starting up the machine, materials do not discharge.   

Insufficient water when starting up;
Coarse granularity of the material;
Inversion of main motor;
Unbalanced temperature;
Residue inside the cylinder;

Add water to required level;
Grind the material to required granularity;
Change the phase sequence of the incoming line of the motor;
Adjust temperature to required level;
Stop the machine to clean it and restart it till it’s cleaned.

2

Abnormal discharging

Discharging too fast
(over puffed)

High moisture content of the material;
High temperature in zone II;
Temperature controller out of control.

Decrease moisture content;
Lower temperature in zone II;
Change temperature controller.

3

Products do not puff。

Low temperature in zone II;

Adjust temperature to required level;

4

Abnormal cutting

Products do not shape up or have burrs。

The spaces between some cutting tools are too large.

Readjust the spaces.

5

Main shaft cannot be demounted.

When the power is cut or when production is finished, the main shaft cannot be demounted.

The cylinder is stuffed with raw materials;
The gear box is damaged.

Heat to gelatinization point;
Open the gear box to check.  

Jinan Shengrun Machinery Co., Ltd.
0086-18865912025
0086-531-89654200
No. 18, Area 3, Xiaoluzhuang Industrial Park, Tianqiao, Jinan, China
Contact

Hotline:0086-531-89654200
Phone:0086-18865912025
Site:http://www.capakor.com/eng/
Address:No. 18, Area 3, Xiaoluzhuang Industrial Park, Tianqiao, Jinan, China

E-mail info@foodgm.cn
pk10 重庆彩票 重庆彩票 重庆彩票 幸运飞艇 pk10 幸运飞艇 幸运飞艇 幸运飞艇 幸运飞艇